Quick Summary
The Blue Ink Wash Ribbon Gift Box is a two-piece rigid box: a base and a deep skirt lid, wrapped with a satin ribbon tied into a bow and finished with a printed hang tag. The outer sheet carries a soft blue marbled ink-wash pattern, matched to a lighter blue ribbon in a similar tone.
Seven stock sizes run from 19 × 13 × 6 cm to 34.8 × 24.8 × 11.5 cm, with 1200 g wall board on the smaller sizes and 1400 g on the larger ones. It is built for hand cream, cosmetics, jewellery, accessories and small gift sets, and ships flat-packed in export cartons.
Lid and base shown separately
Size Specifications
| Size No. | L × W × H (cm) | Wall Board | PCS / Carton |
|---|---|---|---|
| No. 1 | 19 × 13 × 6 | 1200 g | 100 |
| No. 2 | 23 × 16 × 6 | 1200 g | 72 |
| No. 3 | 20 × 18 × 8 | 1200 g | 54 |
| No. 4 | 27 × 20 × 6.5 | 1400 g | 44 |
| No. 5 | 28 × 20 × 9 | 1400 g | 28 |
| No. 6 | 33 × 23 × 7 | 1400 g | 28 |
| No. 7 | 34.8 × 24.8 × 11.5 | 1400 g | 12 |
Dimensions are internal measurements in centimetres. Wall board is the basis weight of the board used for the box walls. Packing quantity is per standard export carton and is confirmed on the final order.
Structure and Finish
Two-piece lid and base. The lid drops over the base with a deep skirt, so the box opens without a hinge, magnet or tuck tab, and the lid can be set down on its own while the gift is taken out.
Rigid walls. The board weight steps up with the box size — 1200 g on No. 1 to No. 3, 1400 g on No. 4 to No. 7 — so a larger box carrying a heavier set gets the stiffer wall it needs, and the corners stay square through stacking, delivery and shelf display.
Marbled outer sheet. The blue ink-wash pattern is printed on the outer sheet and then wrapped onto the board, so the swirl runs around the side faces instead of stopping at a panel line.
Ribbon and hang tag. A satin ribbon is wrapped across the lid and tied into a bow, with a small printed tag hung from the knot. The ribbon is tied on rather than glued down, so the box can be untied and reopened without damaging the lid.
What Is Printed on This Box
| Outer sheet | Blue marbled ink-wash pattern printed full coverage, matched to your own artwork file |
| Ribbon | Satin ribbon in a tone matched to the pattern; colour can be specified |
| Hang tag | A single card with printed text hung from the bow; your own wording and logo replace the sample line |
| Optional extras | Inner fitting (EVA, moulded paper or sponge), logo hot foil, embossing, spot UV, matte or gloss lamination — confirmed before sampling |
Send your artwork and the product you plan to pack; construction, ribbon colour and tag layout are confirmed on a dieline before tooling or bulk production starts.
Detail Display
Customization Process
From the first specification to loaded containers, each order follows the same five steps so requirements are confirmed in writing before production begins.
|
1
Inquiry & SpecsSend the size number, wall board, ribbon preference and estimated quantity. |
2
Dieline & ArtworkWe issue a dieline template for your pattern and tag layout; structure is confirmed on file. |
3
SamplingPre-production samples let you check fit, board stiffness, print colour and ribbon tone. |
4
ProductionBulk run with inline QC checks and reinforced export packing. |
5
ShipmentBooking, shipping documents and tracking through to delivery. |
Frequently Asked Questions
1. What box structure is this?
A two-piece rigid box: a base plus a deep skirt lid that drops over it. There is no hinge, magnet or tuck tab, and the lid lifts off completely, which is why it is photographed separately from the base. Wall board is 1200 g on sizes No. 1 to No. 3 and 1400 g on sizes No. 4 to No. 7.
2. What is supplied with the box?
The box body, the printed outer sheet, the satin ribbon tied into a bow and the printed hang tag. An inner fitting — EVA, moulded paper or sponge — is quoted separately to suit the item you are packing. Boxes ship flat-packed to save freight volume.
3. Can the pattern, ribbon and tag be changed?
Yes. The marbled artwork on the outer sheet can be replaced with your own file, the ribbon colour can be specified to match, and the tag carries your own wording or logo instead of the sample line shown in the photo. Foil, embossing and spot UV are additional options confirmed before sampling.
4. What is the minimum order quantity, and can I get samples first?
The standard MOQ for this ribbon gift box is [MOQ] pieces. Pre-production samples are available before you confirm a bulk order, so you can check the fit of your product, the board stiffness, the print colour and the ribbon tone.
5. Which sizes suit hand cream and small cosmetic sets?
No. 1 at 19 × 13 × 6 cm and No. 2 at 23 × 16 × 6 cm cover single tubes, compacts and small accessory sets. No. 3 at 20 × 18 × 8 cm adds depth for bulkier items, and the 1400 g sizes from No. 4 up are used for multi-piece gift sets. Internal depth is what limits product height, so send the product dimensions before the size is fixed.
6. Where are the boxes made, and which shipping terms do you offer?
We manufacture and export from Xiamen, China, with global shipping across North America, Europe, the Middle East and Asia-Pacific. Packing is reinforced for long-haul transit, and FOB, CIF and DDP terms are available depending on destination and order size. Send us your delivery address and quantity for a landed-cost quotation.
